MIG-ESP® Interior

MIG-ESP® Interior is a heat reflective internal wall and ceiling coating with moisture management properties. Based on the patent pending DHMb® (Double Hybrid Membrane) technology, a breathable membrane system that reflects thermal radiation and regulates moisture, MIG-ESP® Interior controls heat transfer as heat capacity and conductivity of excess humidity are removed. This results in genuinely dry walls, enabling a healthy indoor climate free of dampness and mould. Thus, occupant thermal comfort can be achieved with lower heating and cooling consumption, which translates into a significant cut on energy bills and reduced CO2 emissions.

Send an inquiry


    Write a short messageRequest info materialRecall

    Product features

    • Natural heating and cooling control through infrared reflection
    • Better thermal comfort with lower heating demand
    • Reduces condensation
    • Stable and comfortable room climate
    • Awarded the certificate “recommended for healthy housing” by the Society for Medically Sound Lodgings, Building Hygiene and Indoor Toxicology V.
    • For ecological, energy efficient renovation
    • Prevents mould and fungi in a natural way
    • CO2 emission reduction

    Product Description

    MIG-ESP® Interior conforms to the DIN-adopted European Standard DIN EN 13300 (Water-borne coating materials and coating systems for interior walls and ceilings). MIG-ESP® Interior is certified as “Recommended for Healthy Housing” by the Society for Medically Sound Lodgings, Building Hygiene and Indoor Toxicology e.V. and rated “A” according to the French VOC emission labelling regulation. It is a high-quality, versatile coating that noticeably improves indoor air quality while saving energy at the same time.

    MIG-ESP® Interior can be applied with paint rollers, brushes or spraying units.

    MIG-ESP® Interior can be used with an appropriate primer on a variety of substrates in the entire indoor area. It is the finish coat for the MIG plastering mortars Therm M 65 and MIG 262. It can also be used as a coating on all load-bearing substrates.

    The MIG-ESP® – colour chart offers a wide range of colour choices.


    Depending on the type and porosity of the substrate, approx. 0.4 l/m² with two coats on smooth surfaces.

    Rough, structured or highly absorbent surfaces can significantly increase consumption. Exact consumption quantities can be determined by creating test areas.


    MIG-ESP® Interior is covered by a 10-year quality warranty.  This warranty applies exclusively to the product applied to the surfaces by professional painters and not to the related services in compliance with our warranty conditions.

    This manufacturer’s warranty is in addition to the Consumer Guarantees under the Australian Consumer Law. It does not limit or replace them.


    5 / 15 l plastic buckets

    1,000 l IBC

    To access the Technical Data Sheet



    Download all

    Sustainable Solutions

    Size: 5.73 MB
    Hits: 453

    MIG-ESP® colour chart

    Size: 299.87 KB
    Hits: 118


    Version: 07/2020
    Size: 931.82 KB
    Hits: 132

    SDS-MIG-ESP Interior - EN

    Version: 10/2018
    Size: 290.40 KB
    Hits: 87

    ECO report MIG-ESP® Interior

    Version: 03/2013
    Size: 138.16 KB
    Hits: 79

    Certificate recommended for healthy housing

    Version: 08/2017
    Size: 238.15 KB
    Hits: 108

    Sound measurement MIG-ESP® Interior

    Version: 05/2018
    Size: 272.00 KB
    Hits: 121

    392-2020-00209702_E_EN_French VOC Label

    Version: 07/2020
    Size: 472.87 KB
    Hits: 82


    Examples from our references where this product was used.



    Schul-Mensa Salzkotten

    School canteen in Salzkotten, Germany

    kirche orgel

    German Lutheran Trinity Church, East Melbourne

    MLH MIG-ESP Exterior

    Martin Luther Homes, Boronia, Vic

    Scroll to Top